Introduction of Airplane Simulation Warehouse 1 Plus X
Aircraft simulation bin 1 plus X is to place a horizontal model aircraft between 3 planes that are perpendicular to each other, so that the longitudinal axis of the fuselage is perpendicular to one plane and parallel to the other 2 planes. If we start from 3 directions far enough Look at the aircraft simulation warehouse 1 and add X, draw the shape we see on each plane, that is, project the model aircraft on 3 mutually perpendicular planes, and then expand these 3 mutually perpendicular planes, we can get the right 3 figures shown in top view, side view and front view. Generally speaking, the shape and main dimensions of a model aircraft can be accurately expressed through these 3 views.
According to the different control forms of model aircraft, the classification of aircraft simulation warehouse 1 plus X can be divided into three categories: free flight, wire control and remote control. There are many kinds of static aircraft models, such as metal, plastic, resin, glass fiber reinforced plastic, etc., which can be divided according to the proportion Models of more than 10cm, 20cm, 30cm, 40cm or even more than 1 meter. There are J-10 aircraft models, J-15 carrier aircraft models, J-20 aircraft models, J-11\/J-11B aircraft models, etc. There are many types of dynamic aircraft models. The main materials are EPP foam, EPO foam, KT board, etc. Dynamic aircraft models can fly, mainly remote control aircraft models. The flight direction and speed are controlled by people through the remote control. The flight power is usually realized by batteries or gasoline.
The main materials of the aircraft simulation cabin 1 plus X include 4 parts (resin, plastic, alloy and new composite materials), and the specifications range from 40 meters to 30 cm. The proportions of various models are complete. Most aircraft simulation cabins 1 plus X are composed of 5 It consists of three main parts: wing, fuselage, tail, landing gear and powerplant.